This GPS Active Antenna is designed to receive and amplify the radio signals transmitted on specific frequencies by GPS satellites and convert them to an electronic signal for use by a GPS receiver. It is suitable for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The GPS Ant comes in waterproof housing, 3m coaxial cable with SMA connector and strong magnet base with a rubber boot on the magnet for scratch resistance. This GPS antenna is the perfect addition for all DEVA Broadcast devices with built-in GPS receivers.

Electrical Data
Frequency (GPS Only)	1575.42±3MHz
Frequency (GPS/GLONASS)	2696±3MHz
VSWR	1.5 max
Bandwidth	20MHz min @-10dB
Axial Ratio	3dB max
Polarization	RHCP
Peak Gain	4dBic min @0°
Gain Coverage	≥ -4dBic @-90° ≤ θ ≤ 90° (over 75% volume)
Impedance	50Ω
LNA/Filter Module
Frequency Range	1555 to 1615MHz
Module Gain	29dB typ.
Moise Figure	0.9dB max
Output VSWR	2.0 max
Output Impedance	50Ω
Operation Voltage	DC 2.7 to 5.5V
Current	6 to 11mA
Mechanical Data
Weight (without Cable)	42g
Size	48 x 40 x 13mm
Mounting	Magnetic base
RF Cable	3m with SMA connector
Operating Conditions
Working Temperature	-40°C to +85°C
Storage Temperature	-50°C to +95°C
Vibration	Sine Sweep, 1G(0-P), 1-150-10Hz each axis
Humidity	95 to 100% RH
Weatherproof	IP56